TREP01 flow control handle allows transferring of various liquids without spilling and controls the amount of liquid that is dispensed.

Specifications

• Power: Two (D) Batteries, Sold Separately
• Flow Rate: 2.5 Gallons per Minute
• Suction Tube: 15 inch
• Discharge Hose: 3.28 ft.
• Compatible Liquids: Gasoline, E15, E85 (Remove pump after use, E85 may corrode seals), diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils

Flow Control Nozzle

• Control the rate of liquid at any moment by squeezing the Nozzle lever
• Upper lever position for watering
• Lower lever position for refueling
• Can be locked for longer watering sessions

CSA Certified

• The TREP01 is officially certified and rigorously tested by the CSA group
• This assures that our product’s handling of electronics and gasoline are absolutely safe to use according to the high standards of ANSI, UL, CSA and NSF

Suction Tube

• Adjustable Length: 15 inch
• Fits on 3 Gallon to 6 Gallon gas cans to 5 gallon pails
• Suction end Outer Diameter: 1.2 inch

Swivel Nut Nozzle

• Nozzle connection can perform a 360 degree rotation to prevent hose from tangling

Incompatible

• Thinners or solvents, hot water, drinking water, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid, etc.

What’s Included

• Transfer Pump, Nozzle & Manual